17 of 17 Items
  • Gen 2 REX Blaster Nozzle Head seen attached to gas canister (canister sold separately) Gen 2 REX Blaster Nozzle Head parts, seen disassembled Gen 2 REX Blaster Nozzle Head parts, assembled Gen 2 REX Blaster Nozzle Head with spray straw affixed (this item contains a set of straws) Gen 2 REX Blaster Nozzle Head seen attached to gas canister (canister sold separately)

    Gen 2 REX Blaster Nozzle Head

    UPDATED: This listing is for the 2nd Generation of our REX Blaster Nozzle, which now includes an upgraded top cover for better straw management and a safety cap.  If you already own a 1st Generation REX Blaster Nozzle Head, you can upgrade yours...

    $21.00
  • Air Canister Refill Kit, consisting of five valves and associated seals and o-rings Air Canister with Refill valve installed and closed, containing pressurized gas

    Air Canister Refill Kit

    Many of you got excited when Red Team Tools announced a specialized device for attacking Request-to-Exit (REX) sensors with a blast of super cold air. This tactic has been known for some time, but having the means of concealing such a tool in a pocket or...

    $45.00
  • Hamsa Cabinet Jigglers attached with grommet (grommet not included in all sets) Hamsa Cabinet Jiggler size comparison with our standard size jiggler

    Hamsa Cabinet Jigglers

    Jiggler tools have long been a favorite of pen testers, police, repossession agents, and others who seek a quick method of opening wafer locks. Filing cabinets, access panels, and even car doors are often vulnerable to attack with jiggler tools. Red Team...

    $13.37
  • Air Canister Nozzle Head showing Mark Two upgrade parts Air Canister Nozzle Head with Mark Two upgrade parts installed Air Canister Nozzle Head with spray straw attached Air Canister Nozzle Head with spray straw attached Air Canister Nozzle Head with spray straw attached and connected to a can canister.  Safety cap is visible, removed from Air Canister Nozzle which is now ready to be triggered

    REX Blaster Nozzle - Gen 2 Upgrade Kit

    For some time now, penetration testers have been making entry into buildings via bypassing of Electronic Physical Access Control System (E-PACS) doors by triggering Request-to-Exit (REX) sensors. The Red Team Tools Air Canister Nozzle Head is designed to...

    $5.00
  • Tubular Bitting Decoder seen next to a tubular pick tool Tubular Bitting Decoder seen being used to read the measurements from a tubular pick tool Tubular Bitting Decoder seen being used to read the measurements from a tubular pick tool Tubular Bitting Decoder seen next to a tubular pick tool

    Tubular Bitting Decoder (keychain style)

    Let's say that you've used a tubular pick tool to successfully open a lock.  Nice work... you can even, if you're lucky, lock down the ring on your tubular pick and keep using it as an impromptu key, at least for a little while. But if you want to...

    $2.75
  • Smartphone Macro Lens with Stand Smartphone Macro Lens with Stand Smartphone Macro Lens with Stand Smartphone Macro Lens with Stand Smartphone Macro Lens with Stand

    Smartphone Macro Lens with Stand

    In the past, it has been customary to use small pocket microscope tools or illuminated handheld magnifiers when inspecting the blade of a key for scratch marks during impressioning attacks or when looking closely at lock components during forensic...

    $32.00
  • Hybrid RFID Card - T5577 & "Magic MIFARE" Hybrid RFID Card - T5577 & "Magic MIFARE"

    Hybrid RFID Card - T5577 & "Magic MIFARE"

    This is a unique hacking and pen-testing RFID credential and one of the finest cards that it's been our pleasure to source for you all.  This is a single card with the same thickness of our other RFID credentials (the same thickness of a...

    $6.00
  • Deviant's Door Gap Tool (with DIY white pigment augmentation) Deviant's Door Gap Tool Deviant's Door Gap Tool Deviant's Door Gap Tool (with DIY white pigment augmentation) Deviant's Door Gap Tool

    Door Gap Tool

    If you can believe it, tools of a similar nature to this one retail for nearly $30 in industry-specific catalogs.  Sometimes you can find folk attempting to charge as much as $50 for this simple piece of plastic.  Deviant Ollam could not...

    $12.00
  • MikeDev lock stand with KIK cylinder installed MikeDev lock stand MikeDev lock stand with KIK cylinder installed MikeDev lock stand MikeDev lock stand showing magnet (not included) installed on the bottom side

    MikeDev Compact Lock Stand (set of two)

    There are many, many lock stands and lock holders on the market.  Our good friends at 3D Locksport offer a variety of hardware in this vein.  But sometimes, you just need something VERY compact and simple. Deviant Ollam was conducting a...

    $5.00
  • The Best Tamper Bit Set with Holder and Case The Best Tamper Bit Set with Holder and Case The Best Tamper Bit Set with Holder and Case The Best Tamper Bit Set with Holder and Case Phillips PH0 PH1 and PH2 bits

    "The Best" Tamper Bit Set

    In our Red Team Alliance training classes, we often mention to aspiring physical security consultants that so called "tamper resistant fasteners" are frequently encountered in the field... and everyone involved quickly understands that these are employed...

    $9.45
  • Bypass Band Shove Knife Bracelet Bypass Band shove knife bracelet on the wrist of a person holding a traveler hook Bypass Band shove knife bracelet on the wrist of a person holding a traveler hook Bypass Band shove knife bracelet on someone's wrist, appearing as a normal accessory Bypass Band shove knife bracelet expanded to full length

    Bypass Band Shove Knife Bracelet

    This is a unique and very cool item, available in limited quantity as part of a deal we made with Dark Arts Lockpicking out of Australia.  We've always been fans of the work that James and his associates are doing down there and encourage folk to...

    $14.00
  • Red Team Tools tubular pick connected to bit holder handle. (Clear quick connect handle not included, pick ships with the more conventional set-screw-attach handle) Red Team Tools quick-connect tubular pick with 1/4" hex shaft end Red Team Tools quick-connect tubular pick with 1/4" hex shaft end Red Team Tools tubular pick next to to bit holder handle. (Clear quick connect handle not included, pick ships with the more conventional set-screw-attach handle) Red Team Tools quick-connect tubular pick with included black set-screw handle

    Quick-Connect Tubular Lockpick

    UPDATE: All tubular picks sold by Red Team Tools now include one of our custom tubular bitting decoder tools, included free. This is one of the finest tubular picking tools it has ever been our pleasure to use. Not only is the whole unit constructed out...

    $85.00
  • MagSquare Slippers MagSquare Slippers MagSquare Slippers MagSquare Slippers MagSquare Slippers

    MagSquare Slippers

    All MagSwitch products sold by Red Team Tools now include our plastic "MagSlipper" covers to protect door frames and other surfaces from scratches and visual damage.  If you have purchased a MagSquare from us in the past or if you've acquired one...

    $5.00
17 of 17 Items