Access Control & RFID

21 of 21 Items
  • Gen 3 REX Blaster Parts: three o-rings and two straw adapters shown next to Nozzle Head REX Blaster Nozzle Head installed on an r134a canister (available separately) and seen next to other spare parts GEX Blaster Nozzle Head shown in Gen 3 configuration Gen 3 REX Blaster Parts: three o-rings, two straw adapters, one long nylon sprayer straw REX Blaster Nozzle Head installed on an r134a canister (available separately)

    REX Blaster Nozzle Head (Gen 3)

    UPDATED: This listing is for the 3rd Generation of our REX Blaster Nozzle, which includes new adapters that more securely hold the spray straws and prevent leaks.  Also, the Gen 3 includes a much longer piece of spray straw tubing made of PA12 nylon...

    $21.00
  • Air Canister Refill Kit, consisting of five valves and associated seals and o-rings Air Canister with Refill valve installed and closed, containing pressurized gas

    Air Canister Refill Kit

    Many of you got excited when Red Team Tools announced a specialized device for attacking Request-to-Exit (REX) sensors with a blast of super cold air. This tactic has been known for some time, but having the means of concealing such a tool in a pocket or...

    $45.00
  • Gen 3 REX Blaster Parts: three o-rings, two straw adapters, one long nylon sprayer straw Gen 3 REX Blaster parts shown attached to REX Blaster Nozzle Head Gen 3 REX Blaster Parts: three o-rings, two straw adapters, one long nylon sprayer straw

    REX Blaster Nozzle Head (Gen 3 Upgrade Kit)

    For some time now, penetration testers have been making entry into buildings via bypassing of Electronic Physical Access Control System (E-PACS) doors by triggering Request-to-Exit (REX) sensors. The Red Team Tools REX Blaster Air Canister Nozzle Head is...

    $5.00
  • Canisters of r134a for REX Sensor Triggering Canisters of r134a for REX Sensor Triggering

    Canisters of r134a for REX Sensor Triggering

    After months of research and negotiation with a gas supplier, Red Team Tools is prepared to offer a tool that will allow professional entry teams, first responders, and security testers the means of triggering passive infrared Request-to-Exit (REX)...

    $60.00
  • The Best Tamper Bit Set with Holder and Case The Best Tamper Bit Set with Holder and Case The Best Tamper Bit Set with Holder and Case The Best Tamper Bit Set with Holder and Case Phillips PH0 PH1 and PH2 bits

    "The Best" Tamper Bit Set

    In our Red Team Alliance training classes, we often mention to aspiring physical security consultants that so called "tamper resistant fasteners" are frequently encountered in the field... and everyone involved quickly understands that these are employed...

    $9.45
  • Detex Key Set: DT11-DT20 Detex Key Set: DT11-DT20 Detex Key Set: DT11-DT20

    Detex Key Set: DT11-DT20

    The Detex company is famous for their door access restriction and panic egress alarm hardware.  While these products are designed to accept an end customer's lock cylinder (which can be a high security lock cylinder, if desired) the Detex hardware...

    $35.00
  •  UltraViolet Powder PIN Detection Kit  UltraViolet Powder PIN Detection Kit  UltraViolet Powder PIN Detection Kit  UltraViolet Powder PIN Detection Kit  UltraViolet Powder PIN Detection Kit

    UltraViolet Powder PIN Detection Kit

    While there are other ways of capturing access control PIN numbers and alarm system codes, this very low-tech attack vector can be used in situations when electronic interception isn't feasible. A small application of UV-reactive powder can be brushed...

    $13.37
  • Blank iCLASS 16K RFID Tag with Adhesive Back Blank iCLASS 16K RFID Tag with Adhesive Back

    Blank iCLASS 16K RFID Tag with Adhesive Back

    This is an non-programmed, iCLASS credential in an UNPERSONALIZED STATE. Using this credential will require an understanding of personalization procedures or tools for the PicoPass chip. This type of credential is required to create "configuration" cards...

    $13.00
  • Proxmark3 RDV4 Low Frequency Antenna Set

    Proxmark3 RDV4 Low Frequency Antenna Set

    This Proxmark3 RDV4 LF Antenna Set includes a medium range Low Frequency antenna and long range Low Frequency antenna.The stock Low Frequency antenna included with the Proxmark3 RDV4 has a read range of between 40mm to 80mm, but the specialized medium...

    $95.00
  • Proxmark3 RDV4 High Frequency Antenna Set

    Proxmark3 RDV4 High Frequency Antenna Set

    This Proxmark3 RDV4 HF Antenna Set includes a medium range High Frequency antenna and long range High Frequency antenna.The stock High Frequency antenna included with the Proxmark3 RDV4 has a read range of between 40mm to 80mm, but the specialized medium...

    $95.00
  • Proxmark3 RDV4.01 Antenna

    Proxmark3 RDV4.01 Antenna

    The Proxmark3 device has come a long way over the years.  From being a bare board of components assembled from kits, we later saw the RDV2.0 package from Elechouse with integrated antennas and a slick design.  Various RDV3.0 offerings appeared in Asia. ...

    $60.00
  • RFID LF / HF Field Detector Card front view RFID LF / HF Field Detector Card back view RFID LF / HF Field Detector Card showing LF signal field RFID LF / HF Field Detector Card showing LF signal field RFID LF / HF Field Detector Card showing HF signal field

    RFID LF / HF Field Detector Card

    With this RFID Detector you can find out frequency and duty cycle of any passive LF (125kHz) / HF (13.56 MHz) reader! LF coil has high Q, high sensitivity and long luminescence distance using 6-layer plate technology. HF uses a diode voltage doubler...

    $30.00
  • 9V battery adapter

    9V battery adapter

    9V battery adapter for powering ESPkey Wigand interception tool when it is not connected to credential reader wiring.  This allows a user to program and interact with their ESPkey before deployment.ESPkey and Battery not included.

    $9.99
  • Blank iCLASS 2K RFID Card

    Blank iCLASS 2K RFID Card

    This is an non-programmed, iCLASS credential in an UNPERSONALIZED STATE. Using this credential will require an understanding of personalization procedures or tools for the PicoPass chip. This type of credential is required to create "configuration" cards...

    $20.00
  • "Magic" S50 UID Changable RFID Card

    "Magic" S50 UID Changable RFID Card

    The ISO14443A "Magic" S50 UID Changable Card 1K is a High Frequency RFID credential with some notable features Designed to mimic the functionality of a MIFARE 1K card UID Changeable Card Operating frequency: 13.56 MHz 16-bit CRC, parity, bit...

    $4.25
  • ESPKey Wiegand Interception Tool ESPKey Wiegand Interception Tool ESPKey Wiegand Interception Tool ESPKey Wiegand Interception Tool ESPKey Wiegand Interception Tool

    ESPKey Wiegand Interception Tool

    What is the ESPKey? The ESPKey is an advanced implantable logic analyzer and debugging tool designed for use with any device using the Wiegand communication protocol.  It has a built-in Wireless LAN communication module and can store up to 80,000...

    $79.00
  • AVX 9176 Series Punchdown Tool

    AVX 9176 Series Punchdown Tool

    Now shipping!The AVX 1/4" Hex Punch-Down Tool is a non-cutting punch-down bit that may be used in conjunction with any standard 1/4" hex driver bit handle.  This bit is necessary in order to reliably punch down wires to the ESPKey Insulation Displacement...

    $14.99
21 of 21 Items